Introduction: Diy Darts for Under 2$

Picture of Diy Darts for Under 2$

this is a fun cheap protect to do with your kids or by your self.

Step 1: Supplies

Picture of Supplies

tools

1. scissor

2. clipper

3. pencil

3. ruler

supplies

1. 3 pins

2. 3 tooth picks

3. duck tape* (use different colors of duck tape* if playing agents someone)

4. 1 piece of card stock (or 1 note card)

Step 2: Step 1

Picture of Step 1

1. cut the end of the pins off (thought them away).

Step 3: Step 2

Picture of Step 2

1. on the corner of the paper use ruler and measure 1/2 an inch.

2. from that mark draw a line 1 inch dingily down to the other edge.

( I could not describe it well just look at the images)

3. retrace the fin 8 times and cut them out.

Step 4: Step 3

Picture of Step 3

1. cut the tooth pick to 4 inches

Step 5: Step 4

Picture of Step 4

1. cut some strips of duck-tape* into strips.

2 use the strips to connect the tooth picks to the the chopped pins

3. use some wider pieces of duck tape* to secure it beater.

Step 6: Step 5

Picture of Step 5

1. use more duck tape* to secure the fins.

2. and you are done

*not sponsored by duck tape

Comments

ScottM6 (author)2018-01-15

Good pics but please stop using autocorrect word guessing

tomatoskins (author)2018-01-08

Very nice! Thanks for sharing!

noproblem

About This Instructable

105views

1favorite

License:

More by brick connoisseur:Diy Darts for Under 2$
Add instructable to: