Hi,Recently returned home and tried , as recommended, and found that it was the data ribbon that was at fault. So now it recognises the camera and it automatically initiates the camera when IP address is called. The problem now is that it is running MotionEye and not MotionEyeOS consequently none of...
Asked by maljg on Simple Raspberry Pi Camera Trap Made From a Food Container 4 days ago
Does anybody have the Bluesuite software? I tried registering on the CSR website with a gmail account like on the video but it will not accept my email. If you could send me a Google Drive, Dropbox, etc... link I would greatly appreciate it.
Asked by IoriYagami1 on Upgrade Your $3 Bluetooth Module to Have HID Firmware 4 days ago
Hi all,I'm not an electrician, now it's said.I'm building a device containing a small on/off (latching) switch. When the switch is pushed, the device is activated and remains active until the batteries run out. The device will only be activated once, and afterward it's discarded. This means that the switch will only be pressed once in its lifetime.The use of the switch is to press the button to make the spring drive the contact point to rotate and close the circuit.The device must not be unintededly activated as it could have severe consequences. The button is protected to prevent from this, but I need to know the probability that the switch itself closes, due to a failure.The manufacturer (Chinese) just tells me "don't worry" so I need a second opinion. Is there a way to estimate the probability over a 3 year period? Because if there is a risk at all, I might need to add an extra switch to create a "double commando".Thanks for your help./Karolina
Asked by karolina81 4 days ago
I manage MySQL databases. And this was not difficult before. But now I tried many thoughts and ideas how to solve the complexity, but didn't correct the problem. I can't access the amount of data due to the complexity of the program. And I can't understand what to do about it.
Posted by TaylorHaynes 4 days ago