Broken CD Bird

4,912

93

16

About: Hi! My name in Miranda Sarmiento. I am an architect and I really like art and creativity.

Hi, in this instructable we will give life to our old CDs, this time we will create a hummingbird shaped mobile with beautiful colors and reflections.

Supplies:

Step 1: Materials

  • Some CDs
  • A small wooden sphere
  • A walnut-shaped wood to form the body
  • Hot silicone
  • Wood glue
  • Scalpel
  • Cooking shears
  • Ruler
  • Black plasticine
  • Round balsa sticks
  • Vitraplom golden color
  • Fuchsia and purple markers

Step 2: Body of the Bird

Glue the two wooden figures and let dry.

Step 3: Cut CDs

Trim the CD a little with the kitchen scissors.

To perform the separation of the two layers the scalpel is used as seen in the video.

Make the following form with the ruler and the scalpel on the CDs that are going to be used and with the scissors we cut through the guide the 4 pieces that form the wings and from the square the different sizes of triangles come out to stick them on the body and the head .

Step 4: Paste CD Clippings

Paste the faces of the CDs.

For the face that we are not going to use put glue and then paste the two equal parts.

Step 5: Wings

We put the first layer of wings, we put a point of glue to each of them, then successively we put the different pieces to form the wings of the hummingbird.

Step 6: Tail

Form the figure of the tail of the hummingbird and stick with glue one piece on another as seen in the images. If a longer tail is desired, pieces of different sizes are made.

Step 7: Arrange Wings on the Hummingbird

With silicone stick the wings to the hummingbird body.

Step 8: Hummingbird Body

Stick with silicone each of the triangles cut on the body from bottom to top

Step 9: Hummingbird's Beak

With the round balsa stick of 5 mm in diameter we measure a length of 8 cm and we divide it into two parts, the top part will be the longest and with the rounded tip and the bottom part is shorter and flatter. Then with the golden Vitraplon paint the peak, leave the paint with lumps or uneven to give a bit of realism and detail.

Finally, glue the two parts one on top of the other leaving it half open.

Step 10: Eyes

With the plasticine make a ball of approximately 1 cm of diameter. With the scalpel, we divide it in half and place it in a colander and let it dry. Finally, glue the two parts on top of the peak leaving it half open.

Step 11: Eye Contour

To form the eye contour we painted a CD on the white part with the fuchsia and purple markers, we cut it into smaller triangles to stick them on the head to the side and side of the beak. Finally, we paste the plasticine eyes made above the contours.

And we finish the remaining spaces by filling the head to give the final result.

Step 12: Finishing

Hang inside or outside the house to decorate.

I hope that you all enjoyed this Instructable! Thanks for reading and watching.
Miranda.

Trash to Treasure

Second Prize in the
Trash to Treasure

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Party Challenge

      Party Challenge
    • IoT Challenge

      IoT Challenge

    16 Discussions

    0
    None
    rachymarie

    4 weeks ago

    So beautiful, such a great idea. I've always thought CDs were underrated in their beauty and you've really highlighted that

    1 reply
    1
    None
    wyldecent

    7 weeks ago

    This is the coolest use of old CDs I've seen -- great work! How well does this hold up outside?

    1 reply
    0
    None
    miranda_sarmiwyldecent

    Reply 7 weeks ago

    Thank you! : D If you want to leave it outdoors it could be under a roof or something similar without direct rain.

    1
    None
    Alpha_geek

    8 weeks ago

    Wow, what a stunning use for these old CD’s!

    I've got a stack of old CD's and I've been thinking that there must be something that cam be done with them to avoid them going to land fill, but all of the other projects I've seen have been ... clumsy, ugly, and generally not very nice.

    However, I think your project is a game changer, and I'm guessing we'll see more and more projects along similar lines.

    Congratulations on the design, and congratulations for a great Ible.
    3 replies
    0
    None
    miranda_sarmiAlpha_geek

    Reply 8 weeks ago

    Thank you very much for such a nice comment. I hope the tutorial has inspired you to make beautiful designs in your home.

    0
    None
    Alpha_geekmiranda_sarmi

    Reply 8 weeks ago

    You are most welcome ... :-)

    I am in the extremely fortunate situation where I have a CNC router in the basement, which obviously removes the limitations of cutting along simple chord lines, and my first thought is to fashion the CD's into fish or reptile scales ... we'll see what I come up with ... :-)

    1
    None
    miranda_sarmiAlpha_geek

    Reply 8 weeks ago

    Wow! What a good idea! I hope you have a nice project and you can show me your creation.

    1
    None
    AnandM54

    2 months ago

    Wow amazing instructable.... Looking so cute friend ..!!

    1 reply
    1
    None
    WUVIE

    2 months ago on Step 12

    Simply in awe, I find myself saying WOW out loud over and over. Well done!

    1 reply
    0
    None
    miranda_sarmiWUVIE

    Reply 2 months ago

    This is the nicest comment I've received on Instructables. Thank you! I feel really flattered.