Let's spice up our garden with this See-Saw fountain.
- Steel Pipe 10 mm https://amzn.to/2TIPzWn
- PVC Pipe 1/2 inch
- PVC Casing
- PVC L-Joint
- Marble Ball 8mm(appx) https://amzn.to/2FhqJ7c
- Water Pump https://amzn.to/2BZ3BZe
- Aquarium Pipe Kit: https://amzn.to/2FeKE5g
- Hot Glue: https://amzn.to/2C6weEh
- Silicone Sealant
- Super Glue: https://amzn.to/2TI6zw2
Step 1: The Balancing Pipe
For balancing the steel pipe a small PVC pipe needs to attach on the middle of the steel pipe with a small hole to attach the pipe.
Put a marble inside the steel pipe and block it with PVC O-rings and attach the L-joint.
Watch the full making of this project on YouTube:
Step 2: The Base
Join the 2 boxes for water storage with PVC as shown
Step 3: The Final Setup
Assemble the balancing pipe and boxes with PVC casing for the stand and balance it with the screw.
Join the aquarium pipe with it and connect a water pump.
Attach the pipe and connect with pump, fill it with stones and water
Now my garden looks beautiful with this Garden see-saw water feature, why don't you try to decorate yours and let us know.
Check out the full making on YouTube:
Check out more DIY Crafts made by RusticKraft Channel on YouTube and don't forget to Share and Subscribe: youtube.com/rustickraftchannel