Hello and welcome to my latest Instructable.
In the renaissance that VHS tapes are having at the moment. Be it up-cycle or re-purpose or people just wanting to watch them. Let me start off by saying this Instructable of for the later. How to fix salvage that prized family video or rare VHS movie if the case gets cracked.
Disclaimer: I am not a professional and I am not responsible for any damaged movies or VCR's that may come from any mistakes made. This has worked for me many times I have even fixed magnetic tapes that snapped entirely*maybe a future Instructable*. I mean come now we are way passed voiding the warrant on VHS and most VHS players.
That said lets get to it.
Step 1: Oh the Analog Horror.
So you go to take out your favorite video, or your spouses in my case and someone has dropped it and cracked it. Little plastic pieces everywhere, lets face it this is not going in your VCR anymore. Most would be inclined to throw it away. Though what of your parents childhood is on them or your first baby steps....or a really campy movie that will probably never make it to Blu-Ray conversion. You can buy kits that will let you convert them but you can not if the master copy is broken.
Next is how you can fix it.
Step 2: What You Will Need
- A broken VHS
- a sacrificial intact VHS
You can find VHS at most thrift stores for less than a dollar or failing that amazon. Normally no more than a few dollars (with shipping) on amazon especially on videos that over-saturated the market. I just happen to have a blank one that came with it's own blank labels.
Step 3: Remove the Screws on Both
Remove the five screws holding the cassette together then while holding it together flip it to the top, press the side button and then remove the top half. Look at the order the tape is in as you will need it to match when you transfer it.
Step 4: Removing the Tape
There are all sorts of small items in here to lose,above is a side by side comparison of all the stuff that can fall out if you open these with the screw side up. Now, press these arms up and remove the tape spools of the new one and set it aside.Now take out the spool you wish to save and put it in its place. Gently sliding the tape between the rollers seen above. Then take the slack out of the tape by winding the left one tighter if needed.
Step 5: Replace the Cassette Top.
Time to put the the newly functional tape back together. Take the top, kick up the hing again.Lower it back on and flip it down the protective arm. Hold it together tightly turn it over and replace the five screws.
Step 6: Done: Enjoy Your Video
Try it out. Pop it in your VCR and press play.
The video I just repaired is seen playing above.
I hope this helps someone out. Thank you for reading!