Things you will need:
Pair of scissors/paper knife
Step 1: Step One:
Start drawing lines, mine were ½ cm thick or you could use a paper shredder to get even paper stripes.
And cut out all stripes in to 8” long
You will need 12 paper stripes to make one star.
Step 2: Step Two:
Place 3 stripes over another 3 stripes as shown in the picture. And glue them
You will need some paper clips for the next step. You have to glue each outer stripe together to form a petal. (Refer the picture)
And secure with a paper clip to hold it in place. You can remove the clips once it is dried. Make two of these. You will need two pieces to make one star.
Step 3: Finally
You will have 4 bare ends in each piece. Glue each bare end to the center of each petal in the other piece. (Refer picture)
You will have a puffy star at the end, put some glue to the center and attach both together.
Attach a code and hang :) tee-hee
Show some love by voting, thank you xox