Tell us about yourself!

Complete Your Profile## Achievements

- Drako84 commented on Drako84's instructable Homemade Well Tuned Pan Flute11 months ago
- Drako84 commented on Drako84's instructable Homemade Well Tuned Pan Flute12 months agoView Instructable »
Hi! I used aluminum instead of copper because it was easier to find the diameter I needed, plus it's lighter than copper so the flute will be lighter too. Anyway, you can use any material you wish, the only difference will be in the timbre (the kind of sound the instrument makes). Regarding the formula, you can just click on it and it will open full-size.Speaking of the formulas, there are a total of four symbols: the lenght of the pipe L, the speed of sound v, the frequency of the note produced f, and the distance of the note from the central A n, measured in half-tones. The first formula L=v/(4f) can be used to determine the length of the pipe considering the speed of sound in air and the frequency of the note you with to produce. Since the notes are usually called by name, not by fre...

see more » - Drako84 commented on Drako84's instructable Homemade well tuned pan flute2 years agoView Instructable »
Honestly, I don't understand why you need to know my name...However, I suppose you're asking for the sources of information about the data and the formulas used. As I clearly state, my main sources are Wikipedia, Google and an old textbook of physics that I used when I was in high school (since then I've sold the textbook, and I don't remember the title; I'm italian, and so it was the book).There is something I'm missing? Because for as long as I can think about, I don't seem to find a reason to give you my name.

- Drako84 commented on Drako84's instructable Homemade well tuned pan flute2 years agoView Instructable »
Actually, the speed of sound should be in m/s, and the resulting length is in meters, so 0.15 m = 15 cm, as expected.The formula works for any kind of units system, as long as you keep them consistent for all your calculation; replacing each variable with its unit you can easily see that fact:1. [meters] = [meters/second]/[1/second]2. [centimeters] = [centimeters/second]/[1/second]3. [yards] = [yards/second]/[1/second]4. [inches] = [inches/second]/[1/second]and so on...

- Drako84 commented on Drako84's instructable Homemade well tuned pan flute3 years agoView Instructable »
Hi! The diameter of the pipes will not interfere with the frequency: as you can see, the frequency f is related only to the speed of sound v and the pipe length l.If you know the frequencies you need you can just plug those values into the formula along with the speed of sound, and you'll have all the length you need.You can also use the spreadsheet I've prepared that will make al calculation for you. You can reach it from the last step.Regards!

It seems to me that there's no error at all. Probably the difference is due to the fact that the speed you used is slightly different from the one I used. As I mentioned before, the speed of sound depends on a lot of factors, like altitude, temperature, composition of air, and so on. Also, the note emitted depend also by how the pipe is played, and you can adjust the tone by tilting the flute or changing the way you blow on the open end. Hope this helps!