Tell us about yourself!

Complete Your Profile
  • Connect to Blynk using ESP8266 as Arduino Uno wifi shield (Mac only)

    Thanks, but I solved the problem flashing the 0.22 version, Blynk only works with this specific firmware.

    sorry man but I do not seem to have improvements ... I get the same error continuously.it could be a firmware problem?

    View Instructable »
  • Connect to Blynk using ESP8266 as Arduino Uno wifi shield (Mac only)

    Hello,I still have connection problems:"Failed to disable echo"but I can not understand why ...firmware esp2866 is:AT + GMRAT version: 0.40.0.0 (8 Aug 2015 14:45:58)SDK Version: 1.3.0To-Thinker Technology Co., Ltd.Build: 1.3.0.2 Sep 11, 2015 11:48:04OKso I think this is not the problem as the required firmware is the sdk 1.00 v0.22;I also powered externally esp2866 to avoid power problems;pins esp2866 TX and RX are respectively connected to pin 3 and pin 2 of the Arduino;the code used is://#define BLYNK_DEBUG#define BLYNK_PRINT Serial // Comment this out to disable prints and save space#include <ESP8266_SoftSer.h>#include <BlynkSimpleShieldEsp8266_SoftSer.h>// Set ESP8266 Serial object#include <SoftwareSerial.h>SoftwareSerial EspSerial(2, 3); // RX, TXESP8...

    see more »

    Hello,I still have connection problems:"Failed to disable echo"but I can not understand why ...firmware esp2866 is:AT + GMRAT version: 0.40.0.0 (8 Aug 2015 14:45:58)SDK Version: 1.3.0To-Thinker Technology Co., Ltd.Build: 1.3.0.2 Sep 11, 2015 11:48:04OKso I think this is not the problem as the required firmware is the sdk 1.00 v0.22;I also powered externally esp2866 to avoid power problems;pins esp2866 TX and RX are respectively connected to pin 3 and pin 2 of the Arduino;the code used is://#define BLYNK_DEBUG#define BLYNK_PRINT Serial // Comment this out to disable prints and save space#include <ESP8266_SoftSer.h>#include <BlynkSimpleShieldEsp8266_SoftSer.h>// Set ESP8266 Serial object#include <SoftwareSerial.h>SoftwareSerial EspSerial(2, 3); // RX, TXESP8266 wifi(EspSerial);// You should get Auth Token in the Blynk App.// Go to the Project Settings (nut icon).char auth[] = "YourAuthToken";void setup(){ // Set console baud rate Serial.begin(9600); delay(10); // Set ESP8266 baud rate // 9600 is recommended for Software Serial EspSerial.begin(9600); delay(10); Blynk.begin(auth, wifi, "ssid", "pass");}void loop(){ Blynk.run();}I would be glad if someone could help me ... I do not know what to do ...THANKS

    View Instructable »