Tell us about yourself!

Complete Your Profile
  • albejanon commented on Nikus's instructable Arduino Drone | Quadcopter (3D Printed)5 months ago
    Arduino Drone | Quadcopter (3D Printed)

    To give you some help we need the whole sketch to search the possble mistakes... Greets.

    View Instructable »
  • albejanon commented on Nikus's instructable Arduino Drone | Quadcopter (3D Printed)1 year ago
    Arduino Drone | Quadcopter (3D Printed)

    Hi, sorry but for reasons I do not understand the period was inserted as a part of the web link... Here you have a clean and tested one:https://github.com/maniacbug/RF24Greets.PD: If it does not work neither, copy the link and search it on google, it will appear for sure.

    View Instructable »
  • albejanon commented on Nikus's instructable Arduino Drone | Quadcopter (3D Printed)1 year ago
    Arduino Drone | Quadcopter (3D Printed)

    Hi, be sure you putted in the folder where the source file is, everything that came in the ludwik_drone_flight_controller zip file. If the arduino IDE is asking you to open the file in a separate folder, then rename the folder exatly the same as the source file (.ino) without the (.ino) extension and put the files in this folder.You may have a folder called "ludwik_drone_flight_controller", inside this folder another one with the name of the source file without the .ino, "quadcopter_stabilization_2" and inside this last folder all the header files and cpp files that came in the zip file.In add be sure to delete in the library folder all the rf24 libraries (make sure before that you have a copy of them) and unzip the one from here: https://github.com/maniacbug/RF24....

    see more »

    Hi, be sure you putted in the folder where the source file is, everything that came in the ludwik_drone_flight_controller zip file. If the arduino IDE is asking you to open the file in a separate folder, then rename the folder exatly the same as the source file (.ino) without the (.ino) extension and put the files in this folder.You may have a folder called "ludwik_drone_flight_controller", inside this folder another one with the name of the source file without the .ino, "quadcopter_stabilization_2" and inside this last folder all the header files and cpp files that came in the zip file.In add be sure to delete in the library folder all the rf24 libraries (make sure before that you have a copy of them) and unzip the one from here: https://github.com/maniacbug/RF24.If after you did this the code still does not compile, then go to the libraries folder in your documents/arduino folder, create a new folder called LUDWIK_DRONE and put inside this folder all the files that came in the "ludwik_drone_flight_controller" zip file except the .ino file.Now it may compile without any problem.Greets.

    View Instructable »
  • albejanon commented on Nikus's instructable Arduino Drone | Quadcopter (3D Printed)1 year ago
    Arduino Drone | Quadcopter (3D Printed)

    Update your libraries and would compile ok.

    View Instructable »
  • albejanon followed Nikus1 year ago
      • How to Make Your Own 3D Printed Cookie Cutters
      • Very Simple Line Follower for Beginners
      • Duktig - Personal Assistant