Tell us about yourself!
A Dodecahedron Speaker for Desktop Printers
That little regulator looks ideal but it looks to top out at 9v output is there another one that can take a 4s lipo output (14.8v nominal, 16.8v max) or can this one be wired to bypass the regulator part and just use the cutoff part? I've tried searching for one with a higher output but so far can only find up to 12v...
I already have an alarm, what I need is a device that detects separate cell voltage in the same way as these alarms and cuts the power from the battery instead of activating a buzzer
D.I.Y SMART RGB MATRIX 8x16
Firefly Jar Portable Bluetooth Speakers
Loudspeaker Design by Trial and Error
Make a Battery Protection Circuit (low Voltage Cut-off)
Soldering RGBW and RGB LED Strip Tape
will this work as is on a 4s pack or will it need to be modified in any way?
nevermind, i found a solution (not sure how i failed to find this before). https://www.instructables.com/id/Make-a-Battery-Protection-Circuit-low-voltage-cut-/
i'm hoping that the alarms can be modified in some way so that instead of making a noise i probably won't hear they cut off the power from the batteries instead. is there perhaps some kind of electronic switch that could be set up to unlatch instead of setting an alarm off?
I thought about posting an instructable but I don't know anything about how to weld or cnc, these were done on my behalf from my doodles. I just did a passable job of sawing and bolting stuff together haha...
i saw bicycles with sidecar cargo platforms and thought i'd try something similar with my board, i plan to have swappable platforms for different loads this one will have a big speaker bolted to it for skate meets/critical mass etc and another one is just going to be a plain cargo rack...
change colour in the same way wood does when it gets wet or darker than that?
oh i intend to charge them with a standard charger, i was just concerned that running a combined 36v through 2 usb adapters that are presumably rated for 18v each might cause problems...
Torque: DIY All Terrain Electric Longboard
Mario Planter Box
Custom NeoPixel Rings From Scratch!
Plywood Icosahedron and the Other 4 Platonic Solids
Project Aurora: a Smart Gaming Mousepad for 20€
3D Printer Cantilever 2.0 C3Dt/c
Pro Tips for Using Cardboard
Folding Geodesic Dome
Paper Claw 2.0
Quick Hitch for Bike Trailer
Remove a Wheelchair Motor Brake
Garden Tool Holder - Pinball Flipper Style
World's Easiest Silicone Mold.
Carter's Lasercut Tank - B1 Bis
Alexa and Remote Controlled Main Plugs
LED Snowboard Kit
Zelda Treasure Chest (With Lights & Sound)
Homework Writing Machine
LED Gyro Sphere - Arduino
PIXO Pixel - IoT 16x16 LED Display
PVC Hanging Chair
3D Printed 12000mAh Power Bank
How to Bend PVC & Make Incredible Shapes
Mini Electric GoKart
Cheap Scalable Arduino CNC (Plotter, Mill, 3D Printer...)
String Pendant Lamp
Interval Exposure Light Painting
Make Your Own High Quality CO2 Lasercutter! With Touch Control!
The Bicycle Bubble Machine
Low Budget CNC
Off-Grid Party Sound Systems
Bike Party Sound Trailer
id like to do a scaled down version of this system, would a P-Audio BM2-D750 and one (or two) of these subs (http://store.accusafe.nl/onderdelen/luidsprekers/subwoofer/dayton-audio-sd215a-88-8-dvc-subwoofer-speaker) be compatible with my maxamp20 class D amp (http://store.accusafe.nl/modules/versterkers/maxamp20-met-3-5mm-connector) with an appropriate crossover? how do i choose a crossover, there seems to be a lot of choices on the Blue Aran website much smaller than the chunky looking crossover in your enclosure? what difference would choosing a slightly smaller horn for the driver have on the sound?
DIY Protected Lithium battery holder
Mobile 12V Sound System
Programmable Battery Protection [Open Source]
Water bottle flower bouquet