Tell us about yourself!
gpio 18 that you used to control the motor speed as "gpio -g mode 1 pwm" doesn't work with this command "cd /home/pi/PiBits/ServoBlaster/usersudo ./servod --p1pins=11,16cd "I mean that I have to remove this command if I want to chosen between control to speed or control to servos because gpio 18 always gives me 1 that makes the motor always in high speed.I wish if you could help me to solve this problem, please
Your First Robot Volume 2
6WD robot with aluminum chassis
Mobile Earth Rover One - 3.5G Exploration