Tell us about yourself!

Complete Your Profile
  • Connect to Blynk using ESP8266 as Arduino Uno wifi shield (Mac only)

    It works fine on windows!! only some modifications in some steps I already turn on/off Pin13 from my android. download:python-2.7.11 for windows, install it with Environment Variables path optionsstep 8: find the folder and install pyserial with:setup.py install Step 9. Sketch / include library / add .Zip librarySelect both .zip files:Blynk Library and ITEADLIB_Arduino_WeeESP8266-masterdownload also, because the new version of blynk changed.https://github.com/blynkkk/blynk-library/releases/...copy the folder BlynkESP8266_HardSerto C:\Users\"USER"\Documents\Arduino\libraries where "user" is your user name in windows or copy in this folder C:\Program Files (x86)\Arduino\librariesuse change the librarys with#include <ESP8266_HardSer.h>#include <BlynkSimpleShiel...

    see more »

    It works fine on windows!! only some modifications in some steps I already turn on/off Pin13 from my android. download:python-2.7.11 for windows, install it with Environment Variables path optionsstep 8: find the folder and install pyserial with:setup.py install Step 9. Sketch / include library / add .Zip librarySelect both .zip files:Blynk Library and ITEADLIB_Arduino_WeeESP8266-masterdownload also, because the new version of blynk changed.https://github.com/blynkkk/blynk-library/releases/...copy the folder BlynkESP8266_HardSerto C:\Users\"USER"\Documents\Arduino\libraries where "user" is your user name in windows or copy in this folder C:\Program Files (x86)\Arduino\librariesuse change the librarys with#include <ESP8266_HardSer.h>#include <BlynkSimpleShieldEsp8266_HardSer.h>or you receive the next error, when you compile the program. (I see the same error in MAC (i dont have one, but in the comments i see that many users have the same error that i was having)libraries\blynk-library-master/BlynkSimpleShieldEsp8266.h:14:2: error: #error Sorry, we changed things a little bit. Please check new examples for ESP8266. This is easy to fix :)#error Sorry, we changed things a little bit. Please check new examples for ESP8266. This is easy to fix :)^exit status 1Error compiling.Step 13:to upload the firmware use the command like thisesptool.py --port COM6 write_flash 0x00000 AT22SDK10020150320boot12.binCOM6 is the port used with arduino same like Step 12.I hope that i help some one in windows. it takes me 3 hours to understand what i was doing.I speak spanish sorry for my bad english. Regards

    View Instructable »