Internet of Things Class
3D Scanning Class
very nice project. I would like to build one, but your link to Polargraph 1.2 is broken... Could you re-link it? Thanks
Mini Word ClockView Instructable »
I added a longer video in the conclusion. The last part is in actual speed
Another Arduino Piano With ...View Instructable »
T-flapClocKView Instructable »
I have shown very similar approach in https://www.instructables.com/id/Arduino-MobilePh...I had 16 buttons and adding more would be already difficult due to the voltage and resistance variations...
Tools and Materials for CNC
Welcome to CNC
3D Milling CAM Setup - Fusion 360
I'm boosting the battery voltage. As long the battery voltage is above 2.5V there will be no problems.
I see, that sounds like a nice idea. All Wifi and GPS blocks I know are relatively large, as they are meant for the breadboard. Still there have to be smaller ones in the market.
I see, that sounds like nice idea. All Wifi and GPS blocks I know are relatively large, as they are meant for the breadboard. Still there have to be smaller ones in the market.
I'm not fully sure what do you mean by the small. SIM800L has relatively large size and it requires a micro-controller. I think you can find some smaller components than I used, but in the end it will be challenging to get everything into the 3310 case. And all the components should be compatible with each other.
Arduino MobilePhoneView Instructable »
I made this few months ago and then the zero was not available and now I would look towards that too. Nevertheless, the software I'm presenting here is compatible only with pi1 A and B.
T-gameBoYView Instructable »