Tell us about yourself!

Complete Your Profile
  • Blinking LED Using ARM7 LPC2148 Microcontroller

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBU...

    see more »

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBUG PLACA_NOVA TESTDriver.lib Library was compiled from the driver provided by Texas Instruments.Many thanks Cesario

    View Instructable »
  • 8051 Programming Using Keil UVision IDE

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBU...

    see more »

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBUG PLACA_NOVA TESTDriver.lib Library was compiled from the driver provided by Texas Instruments.Many thanks Cesario

    View Instructable »
  • zurczurc commented on ARK4579's instructable Getting Keil and STM32CubeMX Ready5 months ago
    Getting Keil and STM32CubeMX Ready

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBU...

    see more »

    Hi colleagues I started a week using the ARM Keil uVision5 due to a project from a client that he wants me to modify. The previous programmer who did the project disappeared.My question: The client sent all the firmware files, but this one giving error that is missing some .h files. He sent me a lib too, I edited and saw a lot of strange characters and in that mix I saw the definitions of those files. They are defined within lib. How do I add this lib in the project to resolve these pendencies?Note: The file with uvprojx extension did not come, so I had to create a new project I added the files that came from etc.Also has a reminder in one of the files saying that to compile I should use:Microcontroller TM4C123FH6PMTcompile definitions:rvmdk PART_LM4F231H5QR TARGET_IS_BLIZZARD_RA1 _DEBUG PLACA_NOVA TESTDriver.lib Library was compiled from the driver provided by Texas Instruments.Many thanks Cesario

    View Instructable »
  • zurczurc commented on EasyIoT's instructable Low power door/window sensor1 year ago
    Low power door/window sensor

    Very cool your project, does not work on RaspBerry Pi3?Cesario

    Very cool your project, does not work on RaspBerry Pi3?Cesario

    View Instructable »
  • zurczurc commented on tedmyers's instructable Intro to Printed Circuit Boards2 years ago
    Intro to Printed Circuit Boards

    I use many years the toner process by thermal transfer, made a laminator using a printer fuser laser and my boards are perfect. I even double-sided boards. With a resolution of 0.2 mm.

    Design my PCBs using Altium Protel program, export the holes map with DXF format and import directly ArtCAM 9.0. Where to create the path of the holes and use a CNC.

    View Instructable »
  • zurczurc commented on djsures's instructable Build a Bluetooth Teddy Ruxpin Robot2 years ago
    Build a Bluetooth Teddy Ruxpin Robot

    Excellent project. I will use a RASPBERRY PI3 to control everything.How did you do to move his arms, show some photos.

    View Instructable »